libfprint (1:1.90.3+tod1-0ubuntu3) hirsute; urgency=medium

  * debian/patches:
    - Reorder to give upstream more priority
    - Don't use power-save mode for USB controller (LP: #1906296)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Mon, 30 Nov 2020 20:24:59 +0100

libfprint (1:1.90.3+tod1-0ubuntu2) hirsute; urgency=medium

  * debian/gbp.conf: Include debian's GNOME team preferred settings
  * debian/patches (upstream cherry-picks):
    - Properly handle aes3k devices, resubmitting commands.
      This also needs proper commands cancellation (LP: #1897613)
    - Add support for new Synaptics devices IDs (LP: #1905593)
    - Fix vfs301 verification using device pointer on callbacks (LP: #1905597)
    - Ensure we do not waste power for unsupported devices (LP: #1905603)
    - Add identification support to synaptics driver.
      It allows to unlock / log-in with any finger. (LP: #1905600)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Wed, 25 Nov 2020 19:18:20 +0100

libfprint (1:1.90.3+tod1-0ubuntu1) groovy; urgency=medium

  * New upstream release (LP: #1896861):
    - New goodixmoc driver supporting Goodix USB devices:
      27C6:5840, 27C6:6496, 27C6:60A2
    - Newly added support for Synaptics device:
      06CB:00E9 06CB:00DF (LP: #1893719)
    - Fixed an issue with Synaptics devices sometimes not working at boot
      (LP: #1893719)
    - Fix issue with aes3k driver
  * debian/libfprint-2-tod1.symbols: Added new GType symbols

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 24 Sep 2020 06:14:30 +0200

libfprint (1:1.90.2+tod1-0ubuntu1) groovy; urgency=medium

  * New upstream release
    - Fixed crash in VFS0050 (LP: #1878285)
    - Enrollment fails with UPEK reader (LP: #1881380)
    - Lots of various drivers fixes
    - As per a patch for nbis required for some sensors that was accidentally
      dropped in an earlier release. Users of sensors/drivers aes1610, aes2501,
      aes2550, aes1660, aes2660, elan, upektc_img) need to re-enroll
  * d/p/git_reading_pointer.patch:
    - Dopped (applied upstream)
  * debian/control: Add missing libfprint-2-tod-dev dependencies (LP: #1884267)
  * debian/rules: Be strictier about symbol changes
  * libfprint-2-tod1.symbols: Add new TOD symbols

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Fri, 19 Jun 2020 17:38:55 +0200

libfprint (1:1.90.1+tod1-0ubuntu4) focal; urgency=medium

  * Rebuild with the new libgusb

 -- Sebastien Bacher <seb128@ubuntu.com>  Wed, 18 Mar 2020 15:34:58 +0100

libfprint (1:1.90.1+tod1-0ubuntu3) focal; urgency=medium

  * Rebuild with the current libgusb (lp: #1867639)

 -- Sebastien Bacher <seb128@ubuntu.com>  Mon, 16 Mar 2020 20:27:38 +0100

libfprint (1:1.90.1+tod1-0ubuntu2) focal; urgency=medium

  [ Marco Trevisan (Treviño) ]
  * debian/control: Make package to match soname, rename to libfprint-2-tod1

 -- Iain Lane <iain.lane@canonical.com>  Tue, 03 Mar 2020 09:21:35 +0000

libfprint (1:1.90.1+tod1-0ubuntu1) focal; urgency=medium

  [ Marco Trevisan (Treviño) ]
  * TOD: Add TOuch Drivers loader
  * debian/watch: Monitor libfprint-tod versions only
  * debian/gbp.conf:
    - Track ubuntu branch
    - Use 'upstream-tod' branch as our upstream branch
  * debian: Add libfprint-2-tod library and headers
  * debian/control:
    - Set ubuntu as maintainer
    - Point Vcs tag to the ubuntu branch
  * debian/README.tod.md: Added informations about the TOD fork

  [ Iain Lane ]
  * control: Point Vcs-* to salsa/ubuntu-dev-team/libfprint

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Mon, 02 Mar 2020 16:43:58 +0000

libfprint (1:1.90.1-2) experimental; urgency=medium

  [ Laurent Bigonville ]
  * debian/control: Add libcairo-dev and python3 to build-dependencies as they
    are explicitly required for some tests

  [ Sebastien Bacher ]
  * debian/patches/git_reading_pointer.patch:
    - backport an upstream fix for a test issue
  * debian/rules:
    - don't fail the build on s390x test results, upstream stated that
      fixing those is low priority for them since there is no real
      usecase for fingerprint authentification on that architecture.
  * Use the correct indentation for the previous changes

 -- Laurent Bigonville <bigon@debian.org>  Thu, 27 Feb 2020 16:28:45 +0100

libfprint (1:1.90.1-1) experimental; urgency=medium

  * Team upload.
  * The "I should check if somebody else hasn't done the work already" release
  * New upstream release
    - Replace libusb-1.0 build-dependency by gusb and add libgusb-doc to the
      Build-Depends-Indep. Also drop libxv-dev from the build-dep.
    - Drop d/patches/kFreeBSD_FTBFS_add_ETIME_definition.patch and
      d/patches/use-non-versionned-libusbh-path.patch, not needed anymore
    - debian/patches/udev-rules-creation-add-Debian-specifics.patch: refreshed
      by Sebastien Bacher, thanks!
    - Bump the soname to libfprint-2
    - Bump libglib2.0-dev and meson minimal versions
  * Bump debhelper compatibility version to 12
  * Add gobject-introspection and libgirepository1.0-dev to the
    build-dependencies and install the GObject introspection bindings
  * debian/control: Bump Standards-Version to 4.4.1 (no further changes)
  * debian/control: Build-Depends on python3-cairo, python3-gi, umockdev for
    the testsuite
  * Update debian/libfprint2.postinst for the new supported readers
  * debian/gbp.conf: Upstream tags have changed format
  * debian/control: Bump Standards-Version to 4.5.0 (no further changes)
  * d/p/udev-rules-creation-add-Debian-specifics.patch: Avoid unprivileged
    users to be able to read the devices, this is not necessary and could lead
    to fingerprint images being captured.

 -- Laurent Bigonville <bigon@debian.org>  Thu, 13 Feb 2020 16:35:50 +0100

libfprint (1:1.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
    - d/p/lib-Add-accessor-for-minutia-coordinates.patch,
      d/p/fix_ftbfs_meson.patch: Dropped, applied upstream
    - Other patches: Refreshed
    - debian/libfprint0.symbols: Add newly exported symbol
    - debian/libfprint0.postinst: Call udevadm --trigger also for the new
      supported readers
  * debian/gbp.conf: Set pristine-tar and upstream-vcs-tag
  * debian/control: Update Vcs-* fields (Closes: #909256)
  * debian/rules: Disable the build of the GTK+ test application for now, this
    is not ready yet
  * debian/control: Bump Standards-Version to 4.4.0 (no further changes)
  * debian/libfprint0.symbols: Add the Build-Depends-Package field
  * debian/control: Add libglib2.0-doc to Build-Depends-Indep, this allows
    gtk-doc to properly resolve all the links in the documentation
  * debian/README.source: Document how the list of devices in
    debian/libfprint0.postinst is generated

 -- Laurent Bigonville <bigon@debian.org>  Fri, 23 Aug 2019 17:27:45 +0200

libfprint (1:0.8.2-3) unstable; urgency=medium

  * Team upload.
  * d/p/lib-Add-accessor-for-minutia-coordinates.patch: Add a way to access
    minutia coordinates, this will help to fix ftbfs in fprint_demo

 -- Laurent Bigonville <bigon@debian.org>  Wed, 10 Oct 2018 17:20:45 +0200

libfprint (1:0.8.2-2) unstable; urgency=medium

  * Team upload.
  * debian/rules: Remove the *.private fields of libfprint.pc (Closes:
    #906975)

 -- Laurent Bigonville <bigon@debian.org>  Thu, 23 Aug 2018 15:02:51 +0200

libfprint (1:0.8.2-1) unstable; urgency=medium

  * Team upload.
  * New upstream release (Closes: #904791)
    - Switch to meson, the static library is not built anymore
    - Bump debhelper version to >= 10.3 to have meson support
    - debian/libfprint0.symbols: Add newly exported symbols
    - Fix security hole by zero out memory when allocated (Closes: #890827)
    - d/p/kFreeBSD_FTBFS_add_ETIME_definition.patch: Updated
    - d/p/use-non-versionned-libusbh-path.patch: Updated
    - debian/libfprint0.postinst: Call udevadm --trigger also for the new
      supported readers
  * debian/watch: Update the watch file to point to the freedesktop gitlab
    release page
  * Build the documentation
  * debian/libfprint0.lintian-overrides: Overrides udev-rule-missing-uaccess,
    we don't want the readers to be accessible by unprivileged users
  * debian/rules: Do not explicitly pass --parallel to debhelper as it's the
    default now
  * debian/control: Bump Standards-Version to 4.1.4 (no further changes)
  * debian/control: Bump all the packages to priority optional, priority extra
    is now deprecated
  * debian/rules: Simplify the installation of the udev rules file
  * Ship the API doc in a new libfprint-doc package
  * d/p/fix_ftbfs_meson.patch: Fix FTBFS with newer meson
  * debian/control: Bump Standards-Version to 4.2.0 (no further changes)

 -- Laurent Bigonville <bigon@debian.org>  Sun, 12 Aug 2018 17:51:42 +0200

libfprint (1:0.7.0-1) unstable; urgency=medium

  * Team upload.
  * New 0.7.0 upstream release:
    - Add VFS0050 driver (Closes: #843626)
    - Refresh the patches, drop all the upstreamed ones
  * Bump debhelper compatibility to 10 and rely on dh_autoreconf instead of
    calling the autotools explicitly
  * debian/control:
    - Bump Standards-Version to 3.9.8 (no further changes)
    - Use https for the Homepage and Vcs-* fields
    - Drop libssl-dev build-dependency, not needed anymore (Closes: #854710)
    - Drop libmagickcore-dev build-dep and add libpixman-1-dev
      instead, ImageMagick is not supported since 0.6.0
  * Add debian/watch file
  * debian/libfprint0.postinst: Add new calls to "udevadm --trigger" to
    also properly set the permissions on the newest supported readers.

 -- Laurent Bigonville <bigon@debian.org>  Wed, 17 May 2017 16:58:45 +0200

libfprint (1:0.6.0-2) unstable; urgency=low

  * Upload to unstable
  * Add simple gbp.conf to help with releasing

 -- Didier Raboud <odyx@debian.org>  Sun, 03 May 2015 15:19:19 +0200

libfprint (1:0.6.0-1) experimental; urgency=medium

  * New 0.6.0 upstream release:
    * Drivers:
      - Reduce duplication between AES3500 and AES4000 drivers and add support
        for AES3500 device
      - Add support for UPEK 147e:2020 and Upek Eikon 2 devices
      - Add EgisTec ES603 driver
      - Add VFS5011 driver (Closes: #713815)
      - Always perform 5 scans for image enrollment
      - Better verification with AES1660 driver
      - Better verification for a number of AES drivers
    * Library:
      - Always use Pixman for image manipulation, gdk-pixbuf and ImageMagick
        are not supported any more.
    * Udev rules:
      - Fix warning when USB hub or system does not support power management

  [ Didier Raboud ]
  * Refresh Debian patches
  * Backport two upstream patches:
    - imgdev: fix enum mismatch for dev_change_state() call
    - vfs101: Logical conjunction always evaluates to false
  * Add two new 0.6.0 symbols

 -- Didier Raboud <odyx@debian.org>  Fri, 27 Mar 2015 08:33:53 +0100

libfprint (1:0.5.1-1) unstable; urgency=low

  * New 0.5.1 upstream release:
    - Update patches list for 0.5.1, drop 6 patches incorporated or
      backported from upstream, refresh one.

 -- Didier Raboud <odyx@debian.org>  Sun, 29 Sep 2013 13:41:22 +0200

libfprint (1:0.5.0-6) unstable; urgency=low

  [ Jeremy Bicha ]
  * Fix underlinking against glib - thanks to Julian Taylor
   (Closes: #710381, #713466) 

  [ Didier Raboud ]
  * Run udevadm trigger on 147e:2020 too

 -- Didier Raboud <odyx@debian.org>  Mon, 24 Jun 2013 11:24:43 +0200

libfprint (1:0.5.0-5) unstable; urgency=low

  * Upload to unstable with two more backports from upstream:
    - imgdev: fix cancelling of enrollment from stage_completed callback
    - upeke2: Add support for 147e:2020 ID

 -- Didier Raboud <odyx@debian.org>  Sat, 18 May 2013 16:35:39 +0200

libfprint (1:0.5.0-4) experimental; urgency=low

  * Correct the kFreeBSD ETIME patch update to define ETIME later.

 -- Didier Raboud <odyx@debian.org>  Sun, 03 Mar 2013 15:22:25 +0100

libfprint (1:0.5.0-3) experimental; urgency=low

  * Update kFreeBSD ETIME patch to also correct the vfs301 driver.

 -- Didier Raboud <odyx@debian.org>  Sun, 03 Mar 2013 13:56:16 +0100

libfprint (1:0.5.0-2) experimental; urgency=low

  * Patch vfs301 driver to look for libusb.h without the versionned
    path, hopefully fixes the kFreeBSD FTBFS.
  * Bump Standards-Version to 3.9.4 without changes needed.
  * Only execute the udevadm commands if udevadm is in the script path,
    allows seamless install in chroots without udev and non-Linux.

 -- Didier Raboud <odyx@debian.org>  Sun, 03 Mar 2013 12:58:41 +0100

libfprint (1:0.5.0-1) experimental; urgency=low

  * New 0.5.0 upstream release.

  [ Didier Raboud ]
  * Refresh all patches for 0.5.0
    - Drop fix-libusb-global-variables-FTBFS.patch implemented upstream.
  * Backport two upstream hotfixes for uru4000:
    - uru4000: fix race condition on waiting power up irq
    - uru4000: fix cancelling of imaging from error callback

  [ Luca Capello ]
  * Apply udev rules at install time with udevadm --trigger (Closes: #683863)

 -- Didier Raboud <odyx@debian.org>  Sat, 02 Mar 2013 18:52:25 +0100

libfprint (1:0.4.0-4-gdfff16f-4) unstable; urgency=low

  * Fix libusb global variables FTBFS. (Closes: #680838)

 -- Didier Raboud <odyx@debian.org>  Mon, 09 Jul 2012 00:46:05 +0200

libfprint (1:0.4.0-4-gdfff16f-3) unstable; urgency=low

  * Patch the udev rules creator to:
    - include all devices; (Closes: #679001)
    - handle blacklists correctly.

 -- Didier Raboud <odyx@debian.org>  Tue, 26 Jun 2012 10:52:16 +0200

libfprint (1:0.4.0-4-gdfff16f-2) unstable; urgency=low

  * Mark libfprint0 Multi-Arch: same.
  * Add patch to define ETIME for the kFreeBSD flavours. (Closes:
    #673704)

 -- Didier Raboud <odyx@debian.org>  Mon, 21 May 2012 10:55:36 +0200

libfprint (1:0.4.0-4-gdfff16f-1) unstable; urgency=low

  * New upstream release snapshot.
    - Fix versioning with an epoch: the 0.4.0 version was released and
      this is indeed a post-0.4.0 upstream snapshot.

  * Bump debhelper Build-Depends and compat to 9.
  * Use short debhelper style; migrate to multiarch.
  * Use the built udev rules for autosuspend; append our mode and group
    specificities.
  * Add symbols tracking for libfprint0.
  * Update homepage to the new home at freedesktop.org.
  * Bump Standards-Version to 3.9.3 without changes needed.
  * Add Vcs-* to reflect the new Git repository.
  * Drop the mention of the old synchronous library from the
    description.
  * Drop useless dirs specifications.
  * Avoid duplication of Section snippet in control.
  * Add myself as uploader.

 -- Didier Raboud <odyx@debian.org>  Sat, 19 May 2012 17:11:57 +0200

libfprint (20110418git-2) unstable; urgency=low

  * Transitioning from libmagick9 to libmagickcore (Closes: #625597, #629788).

 -- Ulises Vitulli <dererk@debian.org>  Sun, 12 Jun 2011 12:22:16 -0300

libfprint (20110418git-1) unstable; urgency=low

  * New upstream release.
  * Removing resigned uploader from the Uploaders filed (Closes: #595719).
  * Cleaning out 'dependency_libs' for multiarch support (Closes: #620447).
  * Added libnss as build-depend for uru4000.  
  * Added Validity VFS101 device support. 
  * Bump Standard-version up to 3.9.2.0 (no changes needed).

 -- Ulises Vitulli <dererk@debian.org>  Tue, 19 Apr 2011 14:58:27 -0300

libfprint (20100820git-1) unstable; urgency=low

  * New upstream snapshot.
  * Remove local patches, reported and applied on upstream side, 
    thanks BastienNocera:
    - Check-return-code-from-img2print-conversion.patch.
    - Add-some-corrective-action-if-there-are-missing-pack.patch.
    - Make-the-2-right-shift-correction-happen-on-image-ha.patch.
    - Dont-consider-the-scan-complete-unless-there-is-atle.patch.

 -- Ulises Vitulli <dererk@debian.org>  Mon, 23 Aug 2010 09:02:32 -0300

libfprint (20100819git-2) unstable; urgency=low

  * debian/libfprint0.udev:
    - Include support for uru400 (05ba:0008).
    - Include support for upeke2 and upeksonly (147e:2016).
    - Include support for Veridicom 5thSense (061a:0110).

 -- Ulises Vitulli <dererk@debian.org>  Sun, 22 Aug 2010 21:48:02 -0300

libfprint (20100819git-1) unstable; urgency=low

  * New upstream release:
    - upeke2: Add support for 0x2e status code (Closes: #584563, #585179).
    - Don't crash when no devices are present.
    - Implement discover() methods for upeke2 and upeksonly.
    - Rework "discover" code for drivers.
    - Finish implementation of AES1610 driver.
    - Add udev rules to set devices to autosuspend.
    - Add gdk-pixbuf support.
  * Bump Standard-version up to 3.9.1.

 -- Ulises Vitulli <dererk@debian.org>  Thu, 19 Aug 2010 13:30:18 -0300

libfprint (20081125git-4) unstable; urgency=low

  * debian/libfprint0.udev:
    Include support for aes2501-wy (08ff:2500).

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Sun, 18 Apr 2010 18:34:23 -0300

libfprint (20081125git-3) unstable; urgency=low

  * The 'Oh-yeah!' upload:
    - Droping pkg from experimental, now going to unstable.
  * Switch to dpkg-source 3.0 (quilt) format.
  * Minor package updates to comply with 3.8.4 standard.
    - debian/control: Added misc:Depends for libfprint0+libfprint-dev.

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Wed, 14 Apr 2010 12:00:01 -0300

libfprint (20081125git-2) experimental; urgency=low

  * Fix missing dependence (Closes: #539085).

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Wed, 29 Jul 2009 08:21:37 -0300

libfprint (20081125git-1) experimental; urgency=low

  * Synchronized to upstream v0.1.0-pre1 release.
  * Upstream git checkout fixing little issues:
    - Fixes libtool problem.
    - Add more debuging support.
  * Minor package updates to comply with 3.8.2 standard.
  * Now depends on libusb-1.0.

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Sat, 06 Jun 2009 12:00:26 -0300

libfprint (0.0.6-2) experimental; urgency=low

  * Fixing to non-native pkg (Closes: 481434)

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Thu, 15 May 2008 21:56:24 -0300

libfprint (0.0.6-1) experimental; urgency=low

  * New upstream release (Closes: #472780).
  * Adding udev rule allowing 'plugdev' group access fprint known devices.

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Wed, 26 Mar 2008 10:59:55 -0300

libfprint (0.0.5-3) experimental; urgency=low

  * Fixing dependences (Closes: #469813)

 -- Ulises Vitulli <uvitulli@fi.uba.ar>  Fri, 07 Mar 2008 08:47:18 -0200

libfprint (0.0.5-2) experimental; urgency=low

  * Added license for nbis/* files in copyright file

 -- Miguel Gea Milvaques <xerakko@debian.org>  Mon, 04 Feb 2008 21:02:48 +0100

libfprint (0.0.5-1) experimental; urgency=low

  [ Emfox Zhou ]
  * Initial release (Closes: #460493, #438922)

  [ Miguel Gea Milvaques ]
  * Moved target from unstable to experimental
  * Lintian clean ( makefile distclean in rules)

 -- Miguel Gea Milvaques <xerakko@debian.org>  Sat, 02 Feb 2008 22:56:51 +0100
