mirror of
https://gitlab.freedesktop.org/libfprint/libfprint.git
synced 2025-11-15 07:38:12 +00:00
Uncrustify everything except for nbis
This commit is contained in:
Marco Trevisan (Treviño)
committed by
Benjamin Berg
Benjamin Berg
parent
fd5f511b33
commit
d1fb1e26f3
@@ -28,123 +28,128 @@
|
||||
|
||||
#include "aes3k.h"
|
||||
|
||||
#define DATA_BUFLEN 0x1259
|
||||
#define DATA_BUFLEN 0x1259
|
||||
|
||||
/* image size = FRAME_WIDTH x FRAME_WIDTH */
|
||||
#define FRAME_WIDTH 96
|
||||
#define FRAME_SIZE (FRAME_WIDTH * AES3K_FRAME_HEIGHT / 2)
|
||||
#define FRAME_NUMBER (FRAME_WIDTH / AES3K_FRAME_HEIGHT)
|
||||
#define ENLARGE_FACTOR 3
|
||||
#define FRAME_WIDTH 96
|
||||
#define FRAME_SIZE (FRAME_WIDTH * AES3K_FRAME_HEIGHT / 2)
|
||||
#define FRAME_NUMBER (FRAME_WIDTH / AES3K_FRAME_HEIGHT)
|
||||
#define ENLARGE_FACTOR 3
|
||||
|
||||
|
||||
static struct aes_regwrite init_reqs[] = {
|
||||
/* master reset */
|
||||
{ 0x80, 0x01 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
/* master reset */
|
||||
{ 0x80, 0x01 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
|
||||
{ 0x81, 0x00 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
|
||||
/* scan reset */
|
||||
{ 0x80, 0x02 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
/* scan reset */
|
||||
{ 0x80, 0x02 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
|
||||
/* disable register buffering */
|
||||
{ 0x80, 0x04 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
/* disable register buffering */
|
||||
{ 0x80, 0x04 },
|
||||
{ 0, 0 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0, 0 },
|
||||
|
||||
{ 0x81, 0x00 },
|
||||
{ 0, 0 },
|
||||
/* windows driver reads registers now (81 02) */
|
||||
{ 0x80, 0x00 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0, 0 },
|
||||
/* windows driver reads registers now (81 02) */
|
||||
{ 0x80, 0x00 },
|
||||
{ 0x81, 0x00 },
|
||||
|
||||
/* set excitation bias current: 2mhz drive ring frequency,
|
||||
* 4V drive ring voltage, 16.5mA excitation bias */
|
||||
{ 0x82, 0x04 },
|
||||
/* set excitation bias current: 2mhz drive ring frequency,
|
||||
* 4V drive ring voltage, 16.5mA excitation bias */
|
||||
{ 0x82, 0x04 },
|
||||
|
||||
/* continuously sample drive ring for finger detection,
|
||||
* 62.50ms debounce delay */
|
||||
{ 0x83, 0x13 },
|
||||
/* continuously sample drive ring for finger detection,
|
||||
* 62.50ms debounce delay */
|
||||
{ 0x83, 0x13 },
|
||||
|
||||
{ 0x84, 0x07 }, /* set calibration resistance to 12 kiloohms */
|
||||
{ 0x85, 0x3d }, /* set calibration capacitance */
|
||||
{ 0x86, 0x03 }, /* detect drive voltage */
|
||||
{ 0x87, 0x01 }, /* set detection frequency to 125khz */
|
||||
{ 0x88, 0x02 }, /* set column scan period */
|
||||
{ 0x89, 0x02 }, /* set measure drive */
|
||||
{ 0x8a, 0x33 }, /* set measure frequency and sense amplifier bias */
|
||||
{ 0x8b, 0x33 }, /* set matrix pattern */
|
||||
{ 0x8c, 0x0f }, /* set demodulation phase 1 */
|
||||
{ 0x8d, 0x04 }, /* set demodulation phase 2 */
|
||||
{ 0x8e, 0x23 }, /* set sensor gain */
|
||||
{ 0x8f, 0x07 }, /* set image parameters */
|
||||
{ 0x90, 0x00 }, /* carrier offset null */
|
||||
{ 0x91, 0x1c }, /* set A/D reference high */
|
||||
{ 0x92, 0x08 }, /* set A/D reference low */
|
||||
{ 0x93, 0x00 }, /* set start row to 0 */
|
||||
{ 0x94, 0x05 }, /* set end row to 5 */
|
||||
{ 0x95, 0x00 }, /* set start column to 0 */
|
||||
{ 0x96, 0x18 }, /* set end column to 24*4=96 */
|
||||
{ 0x97, 0x04 }, /* data format and thresholds */
|
||||
{ 0x98, 0x28 }, /* image data control */
|
||||
{ 0x99, 0x00 }, /* disable general purpose outputs */
|
||||
{ 0x9a, 0x0b }, /* set initial scan state */
|
||||
{ 0x9b, 0x00 }, /* clear challenge word bits */
|
||||
{ 0x9c, 0x00 }, /* clear challenge word bits */
|
||||
{ 0x9d, 0x09 }, /* set some challenge word bits */
|
||||
{ 0x9e, 0x53 }, /* clear challenge word bits */
|
||||
{ 0x9f, 0x6b }, /* set some challenge word bits */
|
||||
{ 0, 0 },
|
||||
{ 0x84, 0x07 }, /* set calibration resistance to 12 kiloohms */
|
||||
{ 0x85, 0x3d }, /* set calibration capacitance */
|
||||
{ 0x86, 0x03 }, /* detect drive voltage */
|
||||
{ 0x87, 0x01 }, /* set detection frequency to 125khz */
|
||||
{ 0x88, 0x02 }, /* set column scan period */
|
||||
{ 0x89, 0x02 }, /* set measure drive */
|
||||
{ 0x8a, 0x33 }, /* set measure frequency and sense amplifier bias */
|
||||
{ 0x8b, 0x33 }, /* set matrix pattern */
|
||||
{ 0x8c, 0x0f }, /* set demodulation phase 1 */
|
||||
{ 0x8d, 0x04 }, /* set demodulation phase 2 */
|
||||
{ 0x8e, 0x23 }, /* set sensor gain */
|
||||
{ 0x8f, 0x07 }, /* set image parameters */
|
||||
{ 0x90, 0x00 }, /* carrier offset null */
|
||||
{ 0x91, 0x1c }, /* set A/D reference high */
|
||||
{ 0x92, 0x08 }, /* set A/D reference low */
|
||||
{ 0x93, 0x00 }, /* set start row to 0 */
|
||||
{ 0x94, 0x05 }, /* set end row to 5 */
|
||||
{ 0x95, 0x00 }, /* set start column to 0 */
|
||||
{ 0x96, 0x18 }, /* set end column to 24*4=96 */
|
||||
{ 0x97, 0x04 }, /* data format and thresholds */
|
||||
{ 0x98, 0x28 }, /* image data control */
|
||||
{ 0x99, 0x00 }, /* disable general purpose outputs */
|
||||
{ 0x9a, 0x0b }, /* set initial scan state */
|
||||
{ 0x9b, 0x00 }, /* clear challenge word bits */
|
||||
{ 0x9c, 0x00 }, /* clear challenge word bits */
|
||||
{ 0x9d, 0x09 }, /* set some challenge word bits */
|
||||
{ 0x9e, 0x53 }, /* clear challenge word bits */
|
||||
{ 0x9f, 0x6b }, /* set some challenge word bits */
|
||||
{ 0, 0 },
|
||||
|
||||
{ 0x80, 0x00 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0, 0 },
|
||||
{ 0x81, 0x04 },
|
||||
{ 0, 0 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0x80, 0x00 },
|
||||
{ 0x81, 0x00 },
|
||||
{ 0, 0 },
|
||||
{ 0x81, 0x04 },
|
||||
{ 0, 0 },
|
||||
{ 0x81, 0x00 },
|
||||
};
|
||||
|
||||
struct _FpiDeviceAes4000 {
|
||||
FpiDeviceAes3k parent;
|
||||
struct _FpiDeviceAes4000
|
||||
{
|
||||
FpiDeviceAes3k parent;
|
||||
};
|
||||
G_DECLARE_FINAL_TYPE(FpiDeviceAes4000, fpi_device_aes4000, FPI,
|
||||
DEVICE_AES4000, FpiDeviceAes3k);
|
||||
G_DEFINE_TYPE(FpiDeviceAes4000, fpi_device_aes4000, FPI_TYPE_DEVICE_AES3K);
|
||||
G_DECLARE_FINAL_TYPE (FpiDeviceAes4000, fpi_device_aes4000, FPI,
|
||||
DEVICE_AES4000, FpiDeviceAes3k);
|
||||
G_DEFINE_TYPE (FpiDeviceAes4000, fpi_device_aes4000, FPI_TYPE_DEVICE_AES3K);
|
||||
|
||||
|
||||
static const FpIdEntry id_table [ ] = {
|
||||
{ .pid = 0x08ff, .vid = 0x5501 },
|
||||
{ .vid = 0, .pid = 0, .driver_data = 0 },
|
||||
static const FpIdEntry id_table[] = {
|
||||
{ .pid = 0x08ff, .vid = 0x5501 },
|
||||
{ .vid = 0, .pid = 0, .driver_data = 0 },
|
||||
};
|
||||
|
||||
static void fpi_device_aes4000_init(FpiDeviceAes4000 *self) {
|
||||
static void
|
||||
fpi_device_aes4000_init (FpiDeviceAes4000 *self)
|
||||
{
|
||||
}
|
||||
|
||||
static void fpi_device_aes4000_class_init(FpiDeviceAes4000Class *klass) {
|
||||
FpDeviceClass *dev_class = FP_DEVICE_CLASS(klass);
|
||||
FpImageDeviceClass *img_class = FP_IMAGE_DEVICE_CLASS(klass);
|
||||
FpiDeviceAes3kClass *aes_class = FPI_DEVICE_AES3K_CLASS (klass);
|
||||
static void
|
||||
fpi_device_aes4000_class_init (FpiDeviceAes4000Class *klass)
|
||||
{
|
||||
FpDeviceClass *dev_class = FP_DEVICE_CLASS (klass);
|
||||
FpImageDeviceClass *img_class = FP_IMAGE_DEVICE_CLASS (klass);
|
||||
FpiDeviceAes3kClass *aes_class = FPI_DEVICE_AES3K_CLASS (klass);
|
||||
|
||||
dev_class->id = "aes4000";
|
||||
dev_class->full_name = "AuthenTec AES4000";
|
||||
dev_class->id_table = id_table;
|
||||
dev_class->id = "aes4000";
|
||||
dev_class->full_name = "AuthenTec AES4000";
|
||||
dev_class->id_table = id_table;
|
||||
|
||||
img_class->img_height = FRAME_WIDTH * ENLARGE_FACTOR;
|
||||
img_class->img_width = FRAME_WIDTH * ENLARGE_FACTOR;
|
||||
img_class->img_height = FRAME_WIDTH * ENLARGE_FACTOR;
|
||||
img_class->img_width = FRAME_WIDTH * ENLARGE_FACTOR;
|
||||
|
||||
aes_class->data_buflen = DATA_BUFLEN;
|
||||
aes_class->frame_width = FRAME_WIDTH;
|
||||
aes_class->frame_size = FRAME_SIZE;
|
||||
aes_class->frame_number = FRAME_NUMBER;
|
||||
aes_class->enlarge_factor = ENLARGE_FACTOR;
|
||||
aes_class->init_reqs = init_reqs;
|
||||
aes_class->init_reqs_len = G_N_ELEMENTS(init_reqs);
|
||||
aes_class->data_buflen = DATA_BUFLEN;
|
||||
aes_class->frame_width = FRAME_WIDTH;
|
||||
aes_class->frame_size = FRAME_SIZE;
|
||||
aes_class->frame_number = FRAME_NUMBER;
|
||||
aes_class->enlarge_factor = ENLARGE_FACTOR;
|
||||
aes_class->init_reqs = init_reqs;
|
||||
aes_class->init_reqs_len = G_N_ELEMENTS (init_reqs);
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user