When opening the device, query the stored prints. This should usually
always succeed (and it should be fast). If it fails, then we are very
likely dealing with a corrupted template storage on the device. In that
case, emit the command to clear the storage in order to reset the device
and get it back into a usable state.
It is completely fine for a capture to have a low quality or fail. No
need to warn about this. Main reason to remove it though is so that
recordings that contain such a message do not trigger a failure.
The internal storage of this device can get messed up by other operating
systems, so it's handy to be able to clear it.
I'm not 100% sure whether the commands I've sent to the device are
exactly what is supposed to be used (just a guess), but it did seem to
work, and it even fixed another issue I had.
The API should return the recognized print, even if none of the prints
given in the gallery (or the one passed to verify) matched. Without this
the garbage-collection of left-over prints does not work, causing issues
after reinstall.
Fixes: #444
While useful, there are advantages for this to be done by the
surrounding code (i.e. fprintd). As such, remove the identify stage from
the goodix driver and rely on fprintd doing it for us.
One can probably argue that neither solution is perfect. Ideally, we
would probably return the information required to delete the old print
to the upper stack and let the driver/device handle the duplicate
checking.
However, for now this works well. We may need to reconsider this if we
get devices that do the duplicate checking transparently and just throw
an enroll error.
NOTE: The driver did not report any progress for the identify step. As
such, the number of enroll steps reported by the device remain the same.
Closes: #415
This temperature model has three states:
* COLD
* WARM
* HOT
Device drivers can define the time it requires for the device to get HOT
and COLD. The underlying model assumes an exponential warming and
cooling process and enforces a cool-off time after the device has
reached the HOT state. This cool down period is however shorter than the
specified time in the driver.
The driver has an internal cancellable that simply forwards the external
cancellation in the cancel callback. This is not really needed, we can
instead just use the external cancellable directly by fetching it using
fpi_device_get_cancellable().
It can be convenient for device users to check what it supports, without
having multiple functions to check each single feature.
So expose this and add tests.
Allows drivers to define more fine grained features for devices, not
strictly depending on assumptions we can make depending on the
implemented vfuncs.
We keep this per class but could be in theory moved to each instance.
In any case, added an utility function to initialize it in the way we
can ensure that we've a consistent way for setting them across all the
devices.
Some OEM will integrate fingerprint device with powerButton. It's
possible that a user may press the power button during fingerprint
enroll or identify. This would lead to unintended PC shutdown or
hibernation. We add pwr_btn_shield cmd and related process to shield
the power button function when the fingerprint functionality (enroll and
identify) is used and restore power button function afterwards.
there is no specific API for report finger status,
finger needed status is set when captrue sample cmd send, once cmd receive correct,
finger is pressing on sensor.
Found by coverity. While quite bad in theory, proper safeguards are in
place, so it will only result in a g_return_val_if_fail to be hit rather
than causing more severe side effects.
