device: Add API for perstistent data storage

API consumers should fetch the persistent data when they are done and
store it to disk. It is undefined when this data is updated by the
driver, but in general, it should only be updated once the first time
a device is used.

NEWS

@@ -1,6 +1,17 @@
 This file lists notable changes in each release. For the full history of all
 changes, see ChangeLog.
 
+2022-05-24: v1.94.4 release
+
+Highlights:
+ * synaptics: New PIDs 0x0168, 0x015f
+ * elan: New PID 0x0c4b
+ * elanspi: New PID 0x241f
+ * synaptics: Minor fix to interrupt transfer resubmission
+ * Avoid sysfs writes if value is already expected
+ * Improvements to the testing setup
+ * Fixes to the internal critical section API
+
 2021-11-02: v1.94.3 release
 
 Highlights:

data/autosuspend.hwdb

@@ -146,6 +146,7 @@ usb:v04F3p0C58*
 usb:v04F3p0C7D*
 usb:v04F3p0C7E*
 usb:v04F3p0C82*
+usb:v04F3p0C88*
  ID_AUTOSUSPEND=1
  ID_PERSIST=0
 
@@ -190,6 +191,7 @@ usb:v06CBp0123*
 usb:v06CBp0126*
 usb:v06CBp0129*
 usb:v06CBp0168*
+usb:v06CBp015F*
  ID_AUTOSUSPEND=1
  ID_PERSIST=0
 
@@ -257,6 +259,7 @@ usb:v138Ap0091*
  ID_PERSIST=0
 
 # Known unsupported devices
+usb:v04E8p730B*
 usb:v04F3p036B*
 usb:v04F3p0C00*
 usb:v04F3p0C4C*
@@ -279,6 +282,7 @@ usb:v06CBp00C9*
 usb:v06CBp00D8*
 usb:v06CBp00DA*
 usb:v06CBp00DC*
+usb:v06CBp00E4*
 usb:v06CBp00E7*
 usb:v06CBp00E9*
 usb:v06CBp00FD*
@@ -294,6 +298,7 @@ usb:v0A5Cp5845*
 usb:v0BDAp5812*
 usb:v10A5p0007*
 usb:v10A5p9200*
+usb:v10A5p9800*
 usb:v1188p9545*
 usb:v138Ap0007*
 usb:v138Ap003A*
@@ -315,6 +320,7 @@ usb:v1C7Ap0576*
 usb:v27C6p5042*
 usb:v27C6p5110*
 usb:v27C6p5117*
+usb:v27C6p5125*
 usb:v27C6p5201*
 usb:v27C6p521D*
 usb:v27C6p5301*
@@ -326,6 +332,7 @@ usb:v27C6p5385*
 usb:v27C6p538C*
 usb:v27C6p538D*
 usb:v27C6p5395*
+usb:v27C6p5503*
 usb:v27C6p5584*
 usb:v27C6p55A2*
 usb:v27C6p55A4*

doc/libfprint-2-sections.txt

@@ -40,6 +40,8 @@ fp_device_has_feature
 fp_device_has_storage
 fp_device_supports_identify
 fp_device_supports_capture
+fp_device_get_persistent_data
+fp_device_set_persistent_data
 fp_device_is_open
 fp_device_open
 fp_device_close

libfprint/drivers/elanmoc/elanmoc.c

@@ -28,6 +28,7 @@ static const FpIdEntry id_table[] = {
   { .vid = 0x04f3,  .pid = 0x0c7d,  },
   { .vid = 0x04f3,  .pid = 0x0c7e,  },
   { .vid = 0x04f3,  .pid = 0x0c82,  },
+  { .vid = 0x04f3,  .pid = 0x0c88,  },
   { .vid = 0,  .pid = 0,  .driver_data = 0 },   /* terminating entry */
 };
 
@@ -758,6 +759,7 @@ identify_status_report (FpiDeviceElanmoc *self, int verify_status_id,
 }
 
 enum identify_states {
+  IDENTIFY_SET_MODE,
   IDENTIFY_WAIT_FINGER,
   IDENTIFY_NUM_STATES,
 };
@@ -793,6 +795,13 @@ elan_identify_run_state (FpiSsm *ssm, FpDevice *dev)
   fp_info ("elanmoc %s ", __func__);
   switch (fpi_ssm_get_cur_state (ssm))
     {
+    case IDENTIFY_SET_MODE:
+      fp_info ("elanmoc %s IDENTIFY_SET_MODE", __func__);
+      cmd_buf = elanmoc_compose_cmd (&elanmoc_set_mod_cmd);
+      cmd_buf[3] = 0x03;
+      elanmoc_get_cmd (dev, cmd_buf, elanmoc_set_mod_cmd.cmd_len, elanmoc_set_mod_cmd.resp_len, 0, elanmoc_cmd_ack_cb);
+      break;
+
     case IDENTIFY_WAIT_FINGER:
       fp_info ("elanmoc %s VERIFY_WAIT_FINGER", __func__);
       cmd_buf = elanmoc_compose_cmd (&elanmoc_verify_cmd);

libfprint/drivers/goodixmoc/goodix.c

@@ -661,7 +661,7 @@ fp_enroll_capture_cb (FpiDeviceGoodixMoc  *self,
   /* */
   if (resp->result >= GX_FAILED)
     {
-      fp_warn ("Capture sample failed, result: 0x%x", resp->result);
+      fp_info ("Capture sample failed, result: 0x%x", resp->result);
       fpi_device_enroll_progress (FP_DEVICE (self),
                                   self->enroll_stage,
                                   NULL,
@@ -675,7 +675,7 @@ fp_enroll_capture_cb (FpiDeviceGoodixMoc  *self,
   if ((resp->capture_data_resp.img_quality < self->sensorcfg->config[4]) ||
       (resp->capture_data_resp.img_coverage < self->sensorcfg->config[5]))
     {
-      fp_warn ("Capture sample poor quality(%d): %d or coverage(%d): %d",
+      fp_info ("Capture sample poor quality(%d): %d or coverage(%d): %d",
                self->sensorcfg->config[4],
                resp->capture_data_resp.img_quality,
                self->sensorcfg->config[5],
@@ -1041,6 +1041,47 @@ fp_init_config_cb (FpiDeviceGoodixMoc  *self,
   fpi_ssm_next_state (self->task_ssm);
 }
 
+static void
+fp_init_cb_reset_or_complete (FpiDeviceGoodixMoc  *self,
+                              gxfp_cmd_response_t *resp,
+                              GError              *error)
+{
+  if (error)
+    {
+      fp_warn ("Template storage appears to have been corrupted! Error was: %s", error->message);
+      fp_warn ("A known reason for this to happen is a firmware bug triggered by another storage area being initialized.");
+      fpi_ssm_jump_to_state (self->task_ssm, FP_INIT_RESET_DEVICE);
+    }
+  else
+    {
+      fpi_ssm_mark_completed (self->task_ssm);
+    }
+}
+
+static void
+fp_init_reset_device_cb (FpiDeviceGoodixMoc  *self,
+                         gxfp_cmd_response_t *resp,
+                         GError              *error)
+{
+  if (error)
+    {
+      fp_warn ("Reset failed: %s", error->message);
+      fpi_ssm_mark_failed (self->task_ssm, error);
+      return;
+    }
+  if ((resp->result >= GX_FAILED) && (resp->result != GX_ERROR_FINGER_ID_NOEXIST))
+    {
+      fp_warn ("Reset failed, device reported: 0x%x", resp->result);
+      fpi_ssm_mark_failed (self->task_ssm,
+                           fpi_device_error_new_msg (FP_DEVICE_ERROR_GENERAL,
+                                                     "Failed clear storage, result: 0x%x",
+                                                     resp->result));
+      return;
+    }
+
+  fp_warn ("Reset completed");
+  fpi_ssm_mark_completed (self->task_ssm);
+}
 
 static void
 fp_init_sm_run_state (FpiSsm *ssm, FpDevice *device)
@@ -1065,6 +1106,30 @@ fp_init_sm_run_state (FpiSsm *ssm, FpDevice *device)
                          sizeof (gxfp_sensor_cfg_t),
                          fp_init_config_cb);
       break;
+
+    case FP_INIT_TEMPLATE_LIST:
+      /* List prints to check whether the template DB was corrupted.
+       * As of 2022-06-13 there is a known firmware issue that can cause the
+       * stored templates for Linux to be corrupted when the Windows storage
+       * area is initialized.
+       * In that case, we'll get a protocol failure trying to retrieve the
+       * list of prints.
+       */
+      goodix_sensor_cmd (self, MOC_CMD0_GETFINGERLIST, MOC_CMD1_DEFAULT,
+                         FALSE,
+                         (const guint8 *) &dummy,
+                         1,
+                         fp_init_cb_reset_or_complete);
+      break;
+
+    case FP_INIT_RESET_DEVICE:
+      fp_warn ("Resetting device storage, you will need to enroll all prints again!");
+      goodix_sensor_cmd (self, MOC_CMD0_DELETETEMPLATE, MOC_CMD1_DELETE_ALL,
+                         FALSE,
+                         NULL,
+                         0,
+                         fp_init_reset_device_cb);
+      break;
     }
 
 

libfprint/drivers/goodixmoc/goodix.h

@@ -35,6 +35,8 @@ typedef enum {
 typedef enum {
   FP_INIT_VERSION = 0,
   FP_INIT_CONFIG,
+  FP_INIT_TEMPLATE_LIST,
+  FP_INIT_RESET_DEVICE,
   FP_INIT_NUM_STATES,
 } FpInitState;
 

libfprint/drivers/goodixmoc/goodix_proto.c

@@ -393,10 +393,8 @@ gx_proto_parse_body (uint16_t cmd, uint8_t *buffer, uint16_t buffer_len, pgxfp_c
                                        fingerid_length,
                                        &presp->finger_list_resp.finger_list[num]) != 0)
             {
-              g_error ("parse fingerlist error");
-              presp->finger_list_resp.finger_num = 0;
-              presp->result = GX_FAILED;
-              break;
+              g_warning ("Failed to parse finger list");
+              return -1;
             }
           offset += fingerid_length;
         }

libfprint/drivers/synaptics/synaptics.c

@@ -43,6 +43,7 @@ static const FpIdEntry id_table[] = {
   { .vid = SYNAPTICS_VENDOR_ID,  .pid = 0x0126,  },
   { .vid = SYNAPTICS_VENDOR_ID,  .pid = 0x0129,  },
   { .vid = SYNAPTICS_VENDOR_ID,  .pid = 0x0168,  },
+  { .vid = SYNAPTICS_VENDOR_ID,  .pid = 0x015F,  },
   { .vid = 0,  .pid = 0,  .driver_data = 0 },   /* terminating entry */
 };
 

libfprint/fp-device-private.h

@@ -61,6 +61,7 @@ typedef struct
   FpDeviceFeature features;
 
   guint64         driver_data;
+  GVariant       *persistent_data;
 
   gint            nr_enroll_stages;
   GSList         *sources;

libfprint/fp-device.c

@@ -54,6 +54,7 @@ enum {
   PROP_FPI_UDEV_DATA_SPIDEV,
   PROP_FPI_UDEV_DATA_HIDRAW,
   PROP_FPI_DRIVER_DATA,
+  PROP_FPI_PERSISTENT_DATA,
   N_PROPS
 };
 
@@ -235,6 +236,8 @@ fp_device_finalize (GObject *object)
   g_clear_pointer (&priv->udev_data.spidev_path, g_free);
   g_clear_pointer (&priv->udev_data.hidraw_path, g_free);
 
+  g_clear_pointer (&priv->persistent_data, g_variant_unref);
+
   G_OBJECT_CLASS (fp_device_parent_class)->finalize (object);
 }
 
@@ -304,6 +307,10 @@ fp_device_get_property (GObject    *object,
         g_value_set_string (value, NULL);
       break;
 
+    case PROP_FPI_PERSISTENT_DATA:
+      g_value_set_variant (value, priv->persistent_data);
+      break;
+
     default:
       G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
     }
@@ -354,6 +361,11 @@ fp_device_set_property (GObject      *object,
       priv->driver_data = g_value_get_uint64 (value);
       break;
 
+    case PROP_FPI_PERSISTENT_DATA:
+      g_clear_pointer (&priv->persistent_data, g_variant_unref);
+      priv->persistent_data = g_value_dup_variant (value);
+      break;
+
     default:
       G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
     }
@@ -594,6 +606,21 @@ fp_device_class_init (FpDeviceClass *klass)
                          0,
                          G_PARAM_STATIC_STRINGS | G_PARAM_WRITABLE | G_PARAM_CONSTRUCT_ONLY);
 
+  /**
+   * FpDevice::fpi-persistent-data: (skip)
+   *
+   * This property is only for internal purposes.
+   *
+   * Stability: private
+   */
+  properties[PROP_FPI_PERSISTENT_DATA] =
+    g_param_spec_variant ("fpi-persistent-data",
+                          "Persistent Driver Data",
+                          "Private: Previously stored data for the device",
+                          G_VARIANT_TYPE_ANY,
+                          NULL,
+                          G_PARAM_STATIC_STRINGS | G_PARAM_READWRITE);
+
   g_object_class_install_properties (object_class, N_PROPS, properties);
 }
 
@@ -739,6 +766,139 @@ fp_device_get_temperature (FpDevice *device)
   return priv->temp_current;
 }
 
+/**
+ * fp_device_get_persistent_data:
+ * @device: A #FpDevice
+ * @data: (array length=length) (transfer full) (out): Return location for data pointer
+ * @length: (transfer full) (out): Length of @data
+ * @error: Return location for error
+ *
+ * Retrieves persistent data that should be stored for this device. Storage
+ * needs to be device specific, i.e. device ID and driver must match when
+ * restored.
+ *
+ * Returns: (type void): %TRUE on success
+ */
+gboolean
+fp_device_get_persistent_data (FpDevice *device,
+                               guchar  **data,
+                               gsize    *length,
+                               GError  **error)
+{
+  g_autoptr(GVariant) res = NULL;
+  FpDevicePrivate *priv = fp_device_get_instance_private (device);
+
+  g_assert (data);
+  g_assert (length);
+
+  if (priv->persistent_data == NULL)
+    {
+      *data = NULL;
+      *length = 0;
+
+      return TRUE;
+    }
+
+  /* Version + variant from driver */
+  res = g_variant_new ("(issv)",
+                       1,
+                       fp_device_get_driver (device),
+                       priv->device_id,
+                       priv->persistent_data);
+
+  *length = g_variant_get_size (res);
+  *data = g_malloc (*length);
+  g_variant_store (res, *data);
+
+  return TRUE;
+}
+
+/**
+ * fp_device_get_persistent_data:
+ * @device: A #FpDevice
+ * @data: (array length=length) (transfer none): Persistent Data
+ * @length: (transfer none): Length of @data
+ * @error: Return location for error
+ *
+ * Load persistent data from storage. This function should be called after
+ * a device was discovered and before it is opened for the first time. It is
+ * an error to call it if data has already been set (or generated by the
+ * driver).
+ *
+ * Note that the driver may update the data. The API user should retrieve the
+ * value when done with the device and store it in a persistent location.
+ *
+ * Returns: (type void): %TRUE on success
+ */
+gboolean
+fp_device_set_persistent_data (FpDevice *device,
+                               guchar   *data,
+                               gsize     length,
+                               GError  **error)
+{
+  g_autoptr(GVariant) stored = NULL;
+  g_autoptr(GVariant) loaded = NULL;
+  FpDevicePrivate *priv = fp_device_get_instance_private (device);
+  guchar *copy;
+  gint version;
+  const gchar *device_id;
+  const gchar *driver;
+
+  if (priv->is_open)
+    {
+      g_set_error (error, G_IO_ERROR, G_IO_ERROR_NOT_SUPPORTED,
+                   "Data can only be set right after device creation");
+      return FALSE;
+    }
+
+  if (priv->persistent_data)
+    {
+      g_set_error (error, G_IO_ERROR, G_IO_ERROR_EXISTS,
+                   "Data has already been set");
+      return FALSE;
+    }
+
+  if (length == 0)
+    {
+      g_clear_pointer (&priv->persistent_data, g_variant_unref);
+      g_object_notify_by_pspec (G_OBJECT (device), properties[PROP_FPI_PERSISTENT_DATA]);
+      return TRUE;
+    }
+  g_assert (data);
+
+  copy = g_memdup (data, length);
+  stored = g_variant_new_from_data (G_VARIANT_TYPE ("(issv)"), copy, length, FALSE, g_free, copy);
+
+  if (!stored)
+    {
+      g_set_error (error, G_IO_ERROR, G_IO_ERROR_INVALID_DATA,
+                   "Data could not be parsed");
+      return FALSE;
+    }
+
+  g_variant_get (stored, "(issv)", &version, &driver, &device_id, &loaded);
+  if (version != 1)
+    {
+      g_set_error (error, G_IO_ERROR, G_IO_ERROR_INVALID_DATA,
+                   "Unknown data storage version");
+      return FALSE;
+    }
+
+  if (g_strcmp0 (device_id, priv->device_id) != 0 ||
+      g_strcmp0 (driver, fp_device_get_driver (device)) != 0)
+    {
+      g_set_error (error, G_IO_ERROR, G_IO_ERROR_INVALID_DATA,
+                   "Driver or device ID mismatch!");
+      return FALSE;
+    }
+
+  g_clear_pointer (&priv->persistent_data, g_variant_unref);
+  priv->persistent_data = g_steal_pointer (&loaded);
+  g_object_notify_by_pspec (G_OBJECT (device), properties[PROP_FPI_PERSISTENT_DATA]);
+
+  return TRUE;
+}
+
 /**
  * fp_device_supports_identify:
  * @device: A #FpDevice

libfprint/fp-device.h

@@ -230,6 +230,15 @@ FpDeviceFeature     fp_device_get_features (FpDevice *device);
 gboolean            fp_device_has_feature (FpDevice       *device,
                                            FpDeviceFeature feature);
 
+gboolean fp_device_get_persistent_data (FpDevice *device,
+                                        guchar  **data,
+                                        gsize    *length,
+                                        GError  **error);
+gboolean fp_device_set_persistent_data (FpDevice *device,
+                                        guchar   *data,
+                                        gsize     length,
+                                        GError  **error);
+
 /* Opening the device */
 void fp_device_open (FpDevice           *device,
                      GCancellable       *cancellable,

libfprint/fpi-device.c

@@ -21,6 +21,7 @@
 #define FP_COMPONENT "device"
 #include <math.h>
 #include <fcntl.h>
+#include <errno.h>
 
 #include "fpi-log.h"
 

libfprint/fpi-image-device.c

@@ -277,7 +277,7 @@ fpi_image_device_minutiae_detected (GObject *source_object, GAsyncResult *res, g
     {
       print = fp_print_new (device);
       fpi_print_set_type (print, FPI_PRINT_NBIS);
-      if (!fpi_print_add_from_image (print, image, priv->bz3_threshold, &error))
+      if (!fpi_print_add_from_image (print, image, &error))
         {
           g_clear_object (&print);
 

libfprint/fpi-print.c

@@ -154,14 +154,11 @@ minutiae_to_xyt (struct fp_minutiae *minutiae,
 gboolean
 fpi_print_add_from_image (FpPrint *print,
                           FpImage *image,
-                          gint     bz3_threshold,
                           GError **error)
 {
-  g_autofree struct xyt_struct *xyt = NULL;
   GPtrArray *minutiae;
   struct fp_minutiae _minutiae;
-  gint probe_len;
-  gint score;
+  struct xyt_struct *xyt;
 
   if (print->type != FPI_PRINT_NBIS || !image)
     {
@@ -176,8 +173,8 @@ fpi_print_add_from_image (FpPrint *print,
   if (!minutiae || minutiae->len == 0)
     {
       g_set_error (error,
-                   FP_DEVICE_RETRY,
-                   FP_DEVICE_RETRY_GENERAL,
+                   G_IO_ERROR,
+                   G_IO_ERROR_INVALID_DATA,
                    "No minutiae found in image or not yet detected!");
       return FALSE;
     }
@@ -188,20 +185,7 @@ fpi_print_add_from_image (FpPrint *print,
 
   xyt = g_new0 (struct xyt_struct, 1);
   minutiae_to_xyt (&_minutiae, image->width, image->height, xyt);
-
-  probe_len = bozorth_probe_init (xyt);
-  score = bozorth_to_gallery (probe_len, xyt, xyt);
-  fp_dbg ("self-match score %d/%d", score, bz3_threshold);
-  if (score <= bz3_threshold)
-    {
-      g_set_error (error,
-                   FP_DEVICE_RETRY,
-                   FP_DEVICE_RETRY_GENERAL,
-                   "Not enough minutiae to generate a match!");
-      return FPI_MATCH_SUCCESS;
-    }
-
-  g_ptr_array_add (print->prints, g_steal_pointer (&xyt));
+  g_ptr_array_add (print->prints, xyt);
 
   g_clear_object (&print->image);
   print->image = g_object_ref (image);

libfprint/fpi-print.h

@@ -40,12 +40,11 @@ void     fpi_print_set_device_stored (FpPrint *print,
 
 gboolean fpi_print_add_from_image (FpPrint *print,
                                    FpImage *image,
-                                   gint     bz3_threshold,
                                    GError **error);
 
-FpiMatchResult fpi_print_bz3_match (FpPrint * template,
-                                    FpPrint * print,
-                                    gint bz3_threshold,
+FpiMatchResult fpi_print_bz3_match (FpPrint *temp,
+                                    FpPrint *print,
+                                    gint     bz3_threshold,
                                     GError **error);
 
 /* Helpers to encode metadata into user ID strings. */

libfprint/fprint-list-udev-hwdb.c

@@ -29,6 +29,7 @@ static const FpIdEntry whitelist_id_table[] = {
    * You can generate this list from the wiki page using e.g.:
    *   gio cat https://gitlab.freedesktop.org/libfprint/wiki/-/wikis/Unsupported-Devices.md | sed -n 's!|.*\([0-9a-fA-F]\{4\}\):\([0-9a-fA-F]\{4\}\).*|.*!  { .vid = 0x\1, .pid = 0x\2 },!p'
    */
+  { .vid = 0x04e8, .pid = 0x730b },
   { .vid = 0x04f3, .pid = 0x036b },
   { .vid = 0x04f3, .pid = 0x0c00 },
   { .vid = 0x04f3, .pid = 0x0c4c },
@@ -51,6 +52,7 @@ static const FpIdEntry whitelist_id_table[] = {
   { .vid = 0x06cb, .pid = 0x00d8 },
   { .vid = 0x06cb, .pid = 0x00da },
   { .vid = 0x06cb, .pid = 0x00dc },
+  { .vid = 0x06cb, .pid = 0x00e4 },
   { .vid = 0x06cb, .pid = 0x00e7 },
   { .vid = 0x06cb, .pid = 0x00e9 },
   { .vid = 0x06cb, .pid = 0x00fd },
@@ -66,6 +68,7 @@ static const FpIdEntry whitelist_id_table[] = {
   { .vid = 0x0bda, .pid = 0x5812 },
   { .vid = 0x10a5, .pid = 0x0007 },
   { .vid = 0x10a5, .pid = 0x9200 },
+  { .vid = 0x10a5, .pid = 0x9800 },
   { .vid = 0x1188, .pid = 0x9545 },
   { .vid = 0x138a, .pid = 0x0007 },
   { .vid = 0x138a, .pid = 0x003a },
@@ -87,6 +90,7 @@ static const FpIdEntry whitelist_id_table[] = {
   { .vid = 0x27c6, .pid = 0x5042 },
   { .vid = 0x27c6, .pid = 0x5110 },
   { .vid = 0x27c6, .pid = 0x5117 },
+  { .vid = 0x27c6, .pid = 0x5125 },
   { .vid = 0x27c6, .pid = 0x5201 },
   { .vid = 0x27c6, .pid = 0x521d },
   { .vid = 0x27c6, .pid = 0x5301 },
@@ -98,6 +102,7 @@ static const FpIdEntry whitelist_id_table[] = {
   { .vid = 0x27c6, .pid = 0x538c },
   { .vid = 0x27c6, .pid = 0x538d },
   { .vid = 0x27c6, .pid = 0x5395 },
+  { .vid = 0x27c6, .pid = 0x5503 },
   { .vid = 0x27c6, .pid = 0x5584 },
   { .vid = 0x27c6, .pid = 0x55a2 },
   { .vid = 0x27c6, .pid = 0x55a4 },

libfprint/nbis/fix-musl-build.patch

@@ -0,0 +1,31 @@
+From 2584d440afc87d463cb8dc809d48c660e091c2c4 Mon Sep 17 00:00:00 2001
+From: Sam James <sam@gentoo.org>
+Date: Thu, 23 Jun 2022 05:57:46 +0100
+Subject: [PATCH] nbis: fix build on musl
+
+Drop re-definition of stderr. There's no need for this anywhere
+(including glibc). This breaks in particular on musl because
+stderr (and stdin) are both const, and macros unlike in glibc.
+
+Bug: https://bugs.gentoo.org/853811
+---
+ nbis/include/bozorth.h | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/nbis/include/bozorth.h b/nbis/include/bozorth.h
+index a705da98..fd8975bf 100644
+--- a/nbis/include/bozorth.h
++++ b/nbis/include/bozorth.h
+@@ -217,8 +217,6 @@ struct xytq_struct {
+ /**************************************************************************/
+ /* Globals supporting command line options */
+ extern int verbose_threshold;
+-/* Global supporting error reporting */
+-extern FILE *stderr;
+ 
+ /**************************************************************************/
+ /* In: BZ_GBLS.C */
+-- 
+GitLab
+
+

libfprint/nbis/include/bozorth.h

@@ -217,8 +217,6 @@ struct xytq_struct {
 /**************************************************************************/
 /* Globals supporting command line options */
 extern int verbose_threshold;
-/* Global supporting error reporting */
-extern FILE *stderr;
 
 /**************************************************************************/
 /* In: BZ_GBLS.C */

libfprint/nbis/update-from-nbis.sh

@@ -198,3 +198,6 @@ patch -p0 < fix-scan-build-reports.patch
 
 # Add pass to remove perimeter points
 patch -p0 < remove-perimeter-pts.patch
+
+# Fix build on musl by dropping unnecessary redeclaration of stderr
+patch -p0 < fix-musl-build.patch

meson.build

@@ -1,5 +1,5 @@
 project('libfprint', [ 'c', 'cpp' ],
-    version: '1.94.3',
+    version: '1.94.4',
     license: 'LGPLv2.1+',
     default_options: [
         'buildtype=debugoptimized',

scripts/uncrustify.cfg

@@ -120,7 +120,7 @@ nl_multi_line_cond              true
 # Not clear what to do about that...
 mod_full_brace_for              Remove
 mod_full_brace_if               Remove
-mod_full_brace_if_chain         True
+mod_full_brace_if_chain         1
 mod_full_brace_while            Remove
 mod_full_brace_do               Remove
 mod_full_brace_nl               3

tests/elanmoc/device

@@ -1,63 +1,67 @@
-P: /devices/pci0000:00/0000:00:14.0/usb1/1-1
-N: bus/usb/001/010=1201000200000040F3047E0C05030102000109025300010103A0320904000008FF0000000921100100012215000705810240000107050102400001070582024000010705020240000107058302400001070503024000010705840240000107050402400001
-E: DEVNAME=/dev/bus/usb/001/010
+P: /devices/pci0000:00/0000:00:14.0/usb1/1-9
+N: bus/usb/001/003=1201000200000008F304880C04800102000109025300010100A0320904000008FF0000000921100100012215000705810240000107050102400001070582024000010705020240000107058302400001070503024000010705840240000107050402400001
+E: DEVNAME=/dev/bus/usb/001/003
 E: DEVTYPE=usb_device
 E: DRIVER=usb
-E: PRODUCT=4f3/c7e/305
+E: PRODUCT=4f3/c88/8004
 E: TYPE=0/0/0
 E: BUSNUM=001
-E: DEVNUM=010
+E: DEVNUM=003
 E: MAJOR=189
-E: MINOR=9
+E: MINOR=2
 E: SUBSYSTEM=usb
 E: ID_VENDOR=ELAN
 E: ID_VENDOR_ENC=ELAN
 E: ID_VENDOR_ID=04f3
 E: ID_MODEL=ELAN:ARM-M4
 E: ID_MODEL_ENC=ELAN:ARM-M4
-E: ID_MODEL_ID=0c7e
-E: ID_REVISION=0305
+E: ID_MODEL_ID=0c88
+E: ID_REVISION=8004
 E: ID_SERIAL=ELAN_ELAN:ARM-M4
 E: ID_BUS=usb
 E: ID_USB_INTERFACES=:ff0000:
 E: ID_VENDOR_FROM_DATABASE=Elan Microelectronics Corp.
-E: ID_PATH=pci-0000:00:14.0-usb-0:1
-E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1
+E: ID_PATH=pci-0000:00:14.0-usb-0:9
+E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9
+E: ID_FOR_SEAT=usb-pci-0000_00_14_0-usb-0_9
+E: TAGS=:seat:
+E: CURRENT_TAGS=:seat:
 A: authorized=1\n
 A: avoid_reset_quirk=0\n
 A: bConfigurationValue=1\n
 A: bDeviceClass=00\n
 A: bDeviceProtocol=00\n
 A: bDeviceSubClass=00\n
-A: bMaxPacketSize0=64\n
+A: bMaxPacketSize0=8\n
 A: bMaxPower=100mA\n
 A: bNumConfigurations=1\n
 A: bNumInterfaces= 1\n
-A: bcdDevice=0305\n
+A: bcdDevice=8004\n
 A: bmAttributes=a0\n
 A: busnum=1\n
-A: configuration=add909c9-e67e-4126-a6f7-1e31179e27d9\n
-H: descriptors=1201000200000040F3047E0C05030102000109025300010103A0320904000008FF0000000921100100012215000705810240000107050102400001070582024000010705020240000107058302400001070503024000010705840240000107050402400001
-A: dev=189:9\n
-A: devnum=10\n
-A: devpath=1\n
+A: configuration=
+H: descriptors=1201000200000008F304880C04800102000109025300010100A0320904000008FF0000000921100100012215000705810240000107050102400001070582024000010705020240000107058302400001070503024000010705840240000107050402400001
+A: dev=189:2\n
+A: devnum=3\n
+A: devpath=9\n
 L: driver=../../../../../bus/usb/drivers/usb
-A: idProduct=0c7e\n
+L: firmware_node=../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3d/device:3e/device:47
+A: idProduct=0c88\n
 A: idVendor=04f3\n
 A: ltm_capable=no\n
 A: manufacturer=ELAN\n
 A: maxchild=0\n
-L: port=../1-0:1.0/usb1-port1
-A: power/active_duration=94712\n
+L: port=../1-0:1.0/usb1-port9
+A: power/active_duration=35269124\n
 A: power/async=enabled\n
 A: power/autosuspend=2\n
 A: power/autosuspend_delay_ms=2000\n
-A: power/connected_duration=94712\n
+A: power/connected_duration=35283788\n
 A: power/control=on\n
 A: power/level=on\n
-A: power/persist=1\n
+A: power/persist=0\n
 A: power/runtime_active_kids=0\n
-A: power/runtime_active_time=94436\n
+A: power/runtime_active_time=35276624\n
 A: power/runtime_enabled=forbidden\n
 A: power/runtime_status=active\n
 A: power/runtime_suspended_time=0\n
@@ -77,38 +81,40 @@ A: removable=removable\n
 A: rx_lanes=1\n
 A: speed=12\n
 A: tx_lanes=1\n
-A: urbnum=12\n
+A: urbnum=2773\n
 A: version= 2.00\n
 
 P: /devices/pci0000:00/0000:00:14.0/usb1
-N: bus/usb/001/001=12010002090001406B1D020004050302010109021900010100E0000904000001090000000705810304000C
+N: bus/usb/001/001=12010002090001406B1D020015050302010109021900010100E0000904000001090000000705810304000C
 E: DEVNAME=/dev/bus/usb/001/001
 E: DEVTYPE=usb_device
 E: DRIVER=usb
-E: PRODUCT=1d6b/2/504
+E: PRODUCT=1d6b/2/515
 E: TYPE=9/0/1
 E: BUSNUM=001
 E: DEVNUM=001
 E: MAJOR=189
 E: MINOR=0
 E: SUBSYSTEM=usb
-E: ID_VENDOR=Linux_5.4.0-42-generic_xhci-hcd
-E: ID_VENDOR_ENC=Linux\x205.4.0-42-generic\x20xhci-hcd
+E: ID_VENDOR=Linux_5.15.0-39-generic_xhci-hcd
+E: ID_VENDOR_ENC=Linux\x205.15.0-39-generic\x20xhci-hcd
 E: ID_VENDOR_ID=1d6b
 E: ID_MODEL=xHCI_Host_Controller
 E: ID_MODEL_ENC=xHCI\x20Host\x20Controller
 E: ID_MODEL_ID=0002
-E: ID_REVISION=0504
-E: ID_SERIAL=Linux_5.4.0-42-generic_xhci-hcd_xHCI_Host_Controller_0000:00:14.0
+E: ID_REVISION=0515
+E: ID_SERIAL=Linux_5.15.0-39-generic_xhci-hcd_xHCI_Host_Controller_0000:00:14.0
 E: ID_SERIAL_SHORT=0000:00:14.0
 E: ID_BUS=usb
 E: ID_USB_INTERFACES=:090000:
 E: ID_VENDOR_FROM_DATABASE=Linux Foundation
+E: ID_AUTOSUSPEND=1
 E: ID_MODEL_FROM_DATABASE=2.0 root hub
 E: ID_PATH=pci-0000:00:14.0
 E: ID_PATH_TAG=pci-0000_00_14_0
 E: ID_FOR_SEAT=usb-pci-0000_00_14_0
 E: TAGS=:seat:
+E: CURRENT_TAGS=:seat:
 A: authorized=1\n
 A: authorized_default=1\n
 A: avoid_reset_quirk=0\n
@@ -120,30 +126,31 @@ A: bMaxPacketSize0=64\n
 A: bMaxPower=0mA\n
 A: bNumConfigurations=1\n
 A: bNumInterfaces= 1\n
-A: bcdDevice=0504\n
+A: bcdDevice=0515\n
 A: bmAttributes=e0\n
 A: busnum=1\n
-A: configuration=\n
-H: descriptors=12010002090001406B1D020004050302010109021900010100E0000904000001090000000705810304000C
+A: configuration=
+H: descriptors=12010002090001406B1D020015050302010109021900010100E0000904000001090000000705810304000C
 A: dev=189:0\n
 A: devnum=1\n
 A: devpath=0\n
 L: driver=../../../../bus/usb/drivers/usb
+L: firmware_node=../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3d/device:3e
 A: idProduct=0002\n
 A: idVendor=1d6b\n
 A: interface_authorized_default=1\n
 A: ltm_capable=no\n
-A: manufacturer=Linux 5.4.0-42-generic xhci-hcd\n
-A: maxchild=12\n
-A: power/active_duration=74604360\n
+A: manufacturer=Linux 5.15.0-39-generic xhci-hcd\n
+A: maxchild=14\n
+A: power/active_duration=35270364\n
 A: power/async=enabled\n
 A: power/autosuspend=0\n
 A: power/autosuspend_delay_ms=0\n
-A: power/connected_duration=74606456\n
+A: power/connected_duration=35284300\n
 A: power/control=auto\n
 A: power/level=auto\n
-A: power/runtime_active_kids=4\n
-A: power/runtime_active_time=74605838\n
+A: power/runtime_active_kids=2\n
+A: power/runtime_active_time=35277420\n
 A: power/runtime_enabled=enabled\n
 A: power/runtime_status=active\n
 A: power/runtime_suspended_time=0\n
@@ -164,62 +171,63 @@ A: rx_lanes=1\n
 A: serial=0000:00:14.0\n
 A: speed=480\n
 A: tx_lanes=1\n
-A: urbnum=490\n
+A: urbnum=549\n
 A: version= 2.00\n
 
 P: /devices/pci0000:00/0000:00:14.0
 E: DRIVER=xhci_hcd
 E: PCI_CLASS=C0330
-E: PCI_ID=8086:9DED
-E: PCI_SUBSYS_ID=103C:85EF
+E: PCI_ID=8086:8C31
+E: PCI_SUBSYS_ID=1043:201F
 E: PCI_SLOT_NAME=0000:00:14.0
-E: MODALIAS=pci:v00008086d00009DEDsv0000103Csd000085EFbc0Csc03i30
+E: MODALIAS=pci:v00008086d00008C31sv00001043sd0000201Fbc0Csc03i30
 E: SUBSYSTEM=pci
 E: ID_PCI_CLASS_FROM_DATABASE=Serial bus controller
 E: ID_PCI_SUBCLASS_FROM_DATABASE=USB controller
 E: ID_PCI_INTERFACE_FROM_DATABASE=XHCI
 E: ID_VENDOR_FROM_DATABASE=Intel Corporation
-E: ID_MODEL_FROM_DATABASE=Cannon Point-LP USB 3.1 xHCI Controller
+E: ID_MODEL_FROM_DATABASE=8 Series/C220 Series Chipset Family USB xHCI
 A: ari_enabled=0\n
 A: broken_parity_status=0\n
 A: class=0x0c0330\n
-H: config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
+H: config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
 A: consistent_dma_mask_bits=64\n
 A: d3cold_allowed=1\n
-A: dbc=disabled\n
-A: device=0x9ded\n
+A: device=0x8c31\n
 A: dma_mask_bits=64\n
 L: driver=../../../bus/pci/drivers/xhci_hcd
 A: driver_override=(null)\n
 A: enable=1\n
-A: irq=124\n
+L: firmware_node=../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3d
+A: irq=31\n
 A: local_cpulist=0-3\n
 A: local_cpus=f\n
-A: modalias=pci:v00008086d00009DEDsv0000103Csd000085EFbc0Csc03i30\n
+A: modalias=pci:v00008086d00008C31sv00001043sd0000201Fbc0Csc03i30\n
 A: msi_bus=1\n
-A: msi_irqs/124=msi\n
+A: msi_irqs/31=msi\n
 A: numa_node=-1\n
-A: pools=poolinfo - 0.1\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          0   32  128  1\nbuffer-32           0    0   32  0\nxHCI 1KB stream ctx arrays    0    0 1024  0\nxHCI 256 byte stream ctx arrays    0    0  256  0\nxHCI input/output contexts   11   12 2112 12\nxHCI ring segments   54   54 4096 54\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          9   32  128  1\nbuffer-32           0    0   32  0\n
+A: pools=poolinfo - 0.1\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          0    0  128  0\nbuffer-32           0    0   32  0\nxHCI 1KB stream ctx arrays    0    0 1024  0\nxHCI 256 byte stream ctx arrays    0    0  256  0\nxHCI input/output contexts    5    6 2112  6\nxHCI ring segments   24   24 4096 24\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          3   32  128  1\nbuffer-32           0    0   32  0\n
 A: power/async=enabled\n
-A: power/control=auto\n
+A: power/control=on\n
 A: power/runtime_active_kids=1\n
-A: power/runtime_active_time=74606194\n
-A: power/runtime_enabled=enabled\n
+A: power/runtime_active_time=35278060\n
+A: power/runtime_enabled=forbidden\n
 A: power/runtime_status=active\n
 A: power/runtime_suspended_time=0\n
-A: power/runtime_usage=0\n
+A: power/runtime_usage=1\n
 A: power/wakeup=enabled\n
 A: power/wakeup_abort_count=0\n
 A: power/wakeup_active=0\n
-A: power/wakeup_active_count=0\n
+A: power/wakeup_active_count=5\n
 A: power/wakeup_count=0\n
-A: power/wakeup_expire_count=0\n
-A: power/wakeup_last_time_ms=0\n
-A: power/wakeup_max_time_ms=0\n
-A: power/wakeup_total_time_ms=0\n
-A: resource=0x00000000a1300000 0x00000000a130ffff 0x0000000000140204\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n
-A: revision=0x30\n
-A: subsystem_device=0x85ef\n
-A: subsystem_vendor=0x103c\n
+A: power/wakeup_expire_count=5\n
+A: power/wakeup_last_time_ms=12694896\n
+A: power/wakeup_max_time_ms=103\n
+A: power/wakeup_total_time_ms=518\n
+A: power_state=D0\n
+A: resource=0x00000000f7a00000 0x00000000f7a0ffff 0x0000000000140204\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n0x0000000000000000 0x0000000000000000 0x0000000000000000\n
+A: revision=0x05\n
+A: subsystem_device=0x201f\n
+A: subsystem_vendor=0x1043\n
 A: vendor=0x8086\n
 

tests/goodixmoc/custom.py

@@ -25,6 +25,9 @@ assert d.has_feature(FPrint.DeviceFeature.STORAGE_CLEAR)
 
 d.open_sync()
 
+# 1. verify clear storage command, 2. make sure later asserts are good
+d.clear_storage_sync()
+
 template = FPrint.Print.new(d)
 
 def enroll_progress(*args):

tests/goodixmoc/device

@@ -1,14 +1,14 @@
 P: /devices/pci0000:00/0000:00:14.0/usb1/1-3
-N: bus/usb/001/053=12010002EF000040C627966400010102030109022000010103A0320904000002FF0000040705830240000007050102400000
-E: DEVNAME=/dev/bus/usb/001/053
+N: bus/usb/001/023=12010002EF000040C627966400010102030109022000010103A0320904000002FF0000040705830240000007050102400000
+E: DEVNAME=/dev/bus/usb/001/023
 E: DEVTYPE=usb_device
 E: DRIVER=usb
 E: PRODUCT=27c6/6496/100
 E: TYPE=239/0/0
 E: BUSNUM=001
-E: DEVNUM=053
+E: DEVNUM=023
 E: MAJOR=189
-E: MINOR=52
+E: MINOR=22
 E: SUBSYSTEM=usb
 E: ID_VENDOR=Goodix_Technology_Co.__Ltd.
 E: ID_VENDOR_ENC=Goodix\x20Technology\x20Co.\x2c\x20Ltd.
@@ -23,6 +23,7 @@ E: ID_BUS=usb
 E: ID_USB_INTERFACES=:ff0000:
 E: ID_VENDOR_FROM_DATABASE=Shenzhen Goodix Technology Co.,Ltd.
 E: ID_AUTOSUSPEND=1
+E: ID_PERSIST=0
 E: ID_PATH=pci-0000:00:14.0-usb-0:3
 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3
 A: authorized=1\n
@@ -40,8 +41,8 @@ A: bmAttributes=a0\n
 A: busnum=1\n
 A: configuration=XXXX_MOC_B0\n
 H: descriptors=12010002EF000040C627966400010102030109022000010103A0320904000002FF0000040705830240000007050102400000
-A: dev=189:52\n
-A: devnum=53\n
+A: dev=189:22\n
+A: devnum=23\n
 A: devpath=3\n
 L: driver=../../../../../bus/usb/drivers/usb
 L: firmware_node=../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/device:1d/device:20
@@ -51,16 +52,16 @@ A: ltm_capable=no\n
 A: manufacturer=Goodix Technology Co., Ltd.\n
 A: maxchild=0\n
 L: port=../1-0:1.0/usb1-port3
-A: power/active_duration=29262\n
+A: power/active_duration=22667\n
 A: power/autosuspend=2\n
 A: power/autosuspend_delay_ms=2000\n
-A: power/connected_duration=57399\n
+A: power/connected_duration=917616\n
 A: power/control=auto\n
 A: power/level=auto\n
 A: power/persist=1\n
-A: power/runtime_active_time=29308\n
+A: power/runtime_active_time=22809\n
 A: power/runtime_status=active\n
-A: power/runtime_suspended_time=27850\n
+A: power/runtime_suspended_time=894564\n
 A: power/wakeup=disabled\n
 A: power/wakeup_abort_count=\n
 A: power/wakeup_active=\n
@@ -77,29 +78,29 @@ A: rx_lanes=1\n
 A: serial=XXXX_MOC_B0\n
 A: speed=12\n
 A: tx_lanes=1\n
-A: urbnum=394\n
+A: urbnum=298\n
 A: version= 2.00\n
 
 P: /devices/pci0000:00/0000:00:14.0/usb1
-N: bus/usb/001/001=12010002090001406B1D020013050302010109021900010100E0000904000001090000000705810304000C
+N: bus/usb/001/001=12010002090001406B1D020017050302010109021900010100E0000904000001090000000705810304000C
 E: DEVNAME=/dev/bus/usb/001/001
 E: DEVTYPE=usb_device
 E: DRIVER=usb
-E: PRODUCT=1d6b/2/513
+E: PRODUCT=1d6b/2/517
 E: TYPE=9/0/1
 E: BUSNUM=001
 E: DEVNUM=001
 E: MAJOR=189
 E: MINOR=0
 E: SUBSYSTEM=usb
-E: ID_VENDOR=Linux_5.13.15-200.fc34.x86_64_xhci-hcd
-E: ID_VENDOR_ENC=Linux\x205.13.15-200.fc34.x86_64\x20xhci-hcd
+E: ID_VENDOR=Linux_5.17.12-300.fc36.x86_64_xhci-hcd
+E: ID_VENDOR_ENC=Linux\x205.17.12-300.fc36.x86_64\x20xhci-hcd
 E: ID_VENDOR_ID=1d6b
 E: ID_MODEL=xHCI_Host_Controller
 E: ID_MODEL_ENC=xHCI\x20Host\x20Controller
 E: ID_MODEL_ID=0002
-E: ID_REVISION=0513
-E: ID_SERIAL=Linux_5.13.15-200.fc34.x86_64_xhci-hcd_xHCI_Host_Controller_0000:00:14.0
+E: ID_REVISION=0517
+E: ID_SERIAL=Linux_5.17.12-300.fc36.x86_64_xhci-hcd_xHCI_Host_Controller_0000:00:14.0
 E: ID_SERIAL_SHORT=0000:00:14.0
 E: ID_BUS=usb
 E: ID_USB_INTERFACES=:090000:
@@ -122,11 +123,11 @@ A: bMaxPacketSize0=64\n
 A: bMaxPower=0mA\n
 A: bNumConfigurations=1\n
 A: bNumInterfaces= 1\n
-A: bcdDevice=0513\n
+A: bcdDevice=0517\n
 A: bmAttributes=e0\n
 A: busnum=1\n
 A: configuration=\n
-H: descriptors=12010002090001406B1D020013050302010109021900010100E0000904000001090000000705810304000C
+H: descriptors=12010002090001406B1D020017050302010109021900010100E0000904000001090000000705810304000C
 A: dev=189:0\n
 A: devnum=1\n
 A: devpath=0\n
@@ -136,15 +137,15 @@ A: idProduct=0002\n
 A: idVendor=1d6b\n
 A: interface_authorized_default=1\n
 A: ltm_capable=no\n
-A: manufacturer=Linux 5.13.15-200.fc34.x86_64 xhci-hcd\n
+A: manufacturer=Linux 5.17.12-300.fc36.x86_64 xhci-hcd\n
 A: maxchild=12\n
-A: power/active_duration=219578717\n
+A: power/active_duration=164289796\n
 A: power/autosuspend=0\n
 A: power/autosuspend_delay_ms=0\n
-A: power/connected_duration=219649620\n
+A: power/connected_duration=164360220\n
 A: power/control=auto\n
 A: power/level=auto\n
-A: power/runtime_active_time=219589127\n
+A: power/runtime_active_time=164331876\n
 A: power/runtime_status=active\n
 A: power/runtime_suspended_time=0\n
 A: power/wakeup=disabled\n
@@ -163,14 +164,14 @@ A: rx_lanes=1\n
 A: serial=0000:00:14.0\n
 A: speed=480\n
 A: tx_lanes=1\n
-A: urbnum=4325\n
+A: urbnum=2097\n
 A: version= 2.00\n
 
 P: /devices/pci0000:00/0000:00:14.0
 E: DRIVER=xhci_hcd
 E: PCI_CLASS=C0330
 E: PCI_ID=8086:9DED
-E: PCI_SUBSYS_ID=17AA:2292\n
+E: PCI_SUBSYS_ID=17AA:2292
 E: PCI_SLOT_NAME=0000:00:14.0
 E: MODALIAS=pci:v00008086d00009DEDsv000017AAsd00002292bc0Csc03i30
 E: SUBSYSTEM=pci
@@ -183,7 +184,7 @@ E: ID_MODEL_FROM_DATABASE=Cannon Point-LP USB 3.1 xHCI Controller
 A: ari_enabled=0\n
 A: broken_parity_status=0\n
 A: class=0x0c0330\n
-H: config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
+H: config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
 A: consistent_dma_mask_bits=64\n
 A: d3cold_allowed=1\n
 A: dbc=disabled\n
@@ -201,8 +202,8 @@ A: msi_bus=1\n
 A: msi_irqs/128=msi\n
 A: numa_node=-1\n
 A: pools=poolinfo - 0.1\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          0    0  128  0\nbuffer-32           0    0   32  0\nxHCI 1KB stream ctx arrays    0    0 1024  0\nxHCI 256 byte stream ctx arrays    0    0  256  0\nxHCI input/output contexts   11   12 2112 12\nxHCI ring segments   46   50 4096 50\nbuffer-2048         0    0 2048  0\nbuffer-512          0    0  512  0\nbuffer-128          6   32  128  1\nbuffer-32           0    0   32  0\n
-A: power/control=on\n
-A: power/runtime_active_time=219589302\n
+A: power/control=auto\n
+A: power/runtime_active_time=164332777\n
 A: power/runtime_status=active\n
 A: power/runtime_suspended_time=0\n
 A: power/wakeup=enabled\n

tests/test-fp-device.c

@@ -232,6 +232,53 @@ test_device_has_storage (void)
   G_GNUC_END_IGNORE_DEPRECATIONS
 }
 
+static void
+test_device_persistent_data (void)
+{
+  g_autoptr(FptContext) tctx = fpt_context_new_with_virtual_device (FPT_VIRTUAL_DEVICE_IMAGE);
+  g_autoptr(GVariant) initial = NULL;
+  g_autoptr(GVariant) loaded = NULL;
+  g_autoptr(GError) error = NULL;
+  guint8 *data = (guint8 *) 0xdeadbeef;
+  gsize length = 1;
+
+  initial = g_variant_ref_sink (g_variant_new ("(s)", "stored data"));
+
+  g_assert_true (fp_device_get_persistent_data (tctx->device, &data, &length, &error));
+  g_assert_cmpint (length, ==, 0);
+  g_assert_null (data);
+  g_assert_no_error (error);
+
+  /* Use the fact that this is a property that we can poke from the outside. */
+  g_object_set (tctx->device, "fpi-persistent-data", initial, NULL);
+
+  /* Works now */
+  g_assert_true (fp_device_get_persistent_data (tctx->device, &data, &length, &error));
+  g_assert_cmpint (length, !=, 0);
+  g_assert_nonnull (data);
+  g_assert_no_error (error);
+
+  /* We can't load the data, as data has been set already. */
+  g_assert_false (fp_device_set_persistent_data (tctx->device, data, length, &error));
+  g_assert_error (error, G_IO_ERROR, G_IO_ERROR_EXISTS);
+  g_clear_pointer (&error, g_error_free);
+
+  /* Abuse that we can "load" again if the data is set to NULL.
+   * This is an implementation detail and just a lack of error checking. */
+  g_object_set (tctx->device, "fpi-persistent-data", NULL, NULL);
+
+  /* Incomplete data, causes parsing error */
+  g_assert_false (fp_device_set_persistent_data (tctx->device, data, 5, &error));
+  g_assert_error (error, G_IO_ERROR, G_IO_ERROR_INVALID_DATA);
+  g_clear_pointer (&error, g_error_free);
+
+  g_assert_true (fp_device_set_persistent_data (tctx->device, data, length, &error));
+  g_assert_no_error (error);
+
+  g_object_get (tctx->device, "fpi-persistent-data", &loaded, NULL);
+  g_assert_cmpvariant (initial, loaded);
+}
+
 int
 main (int argc, char *argv[])
 {
@@ -252,6 +299,7 @@ main (int argc, char *argv[])
   g_test_add_func ("/device/sync/supports_identify", test_device_supports_identify);
   g_test_add_func ("/device/sync/supports_capture", test_device_supports_capture);
   g_test_add_func ("/device/sync/has_storage", test_device_has_storage);
+  g_test_add_func ("/device/persistent_data", test_device_persistent_data);
 
   return g_test_run ();
 }