Pretty much all downstream distributions just enable all drivers anyway.
Also, it should work well enough, so it seems right to simply add
elanspi into the list of drivers that are enabled by default.
We were testing only for .ioctl files, but we may now have .pcap file
and ended up simply not running the synaptics test unless there was
still a .ioctl file present.
Simply remove the feature flag for the NO_LIST environment variable.
This also removes the IDENT variant for now as it has never been
implemented as described.
The new elanspi driver in particular needs a lot of ioctl's during the
test. On a normal machine, this would run quite quickly (less than 5s),
however, in busy CI environments this can take longer than 30s, causing
timeouts currently.
Increase the timeout from 10s to 15s. For CI this means the timeout now
is 45s which is hopefully enough.
The new features will be added in 0.16, so match against that. Also,
match against CI_PROJECT_NAME to detect our CI environment (and assume
that umockdev has been patched to the point of supporting all tests).
If the tile in question was hanging over the left edge we would not be
copying the full available width. Fix this and change the test to catch
the error condition (by forcing a too small image and overlap both
ways).
Simplify the code by only selecting the starting point inside the
image/frame and then just checking the both image and frame boundary in
the loop. Not quite as efficient, but it really shouldn't matter too
much here.
Long transfers need to be split into multiple chunks because of
limitations by the spidev kernel driver. If this happens, we need to
make sure that the CS line remains high between the different chunks.
Add code to split the transfer into chunks and ask the driver to not
deassert CS after the transfer. Technically, this is only an
optimization as concurrent access to another device might still cause
deselection. However, this should mean that devices work without having
to change the spidev module parameter.
Use the feature in the hope that it will work. However, print a message
(not a warning), to help with debugging in case someone does run into
issues because of this.
The driver has an internal cancellable that simply forwards the external
cancellation in the cancel callback. This is not really needed, we can
instead just use the external cancellable directly by fetching it using
fpi_device_get_cancellable().
The (trivial) CRC code was copied from gstreamer. However, the license
stated here was LGPLv2 rather than LGPLv2.1+. Identical code can currently
be found upstream in gstreamer licensed under LGPLv2+. As such, update
the license, making it more compatible with the rest of libfprint.
Also add the "or any later version" to upekts.c. The library was already
LGPL2.1+ at the time and libthinkfinger authors approved a license
change.
This command is useful to immediately continue rather than waiting for
input. It is only useful for non-scanning device actions and can be
important when steps need to be explicitly skipped (e.g. to inject an
error in the second command without a way to wait in between).
We were attaching the sources to the default main context. Instead, we
should be attaching them to the current tasks main context (or, failing
that, the current thread local main context).
g_idle_add attaches to the default main context, but the rest of
libfprint is using the thread local main context. Switch to use the
internal fpi_device_add_timeout API for the workaround in order to
not rely on the default main context.
Unfortunately, the implementation was not thread safe and was not
sticking to the thread local main context.
In addition to this, it is not entirely clear to me how this API should
behave. The current approach is to simply cancel the transition with the
state machine halting in its current state. Instead, it could also make
sense for cancellation to cause the state machine to return a
G_IO_ERROR_CANCELLED.
As such, simply remove the feature for now. If anyone actually has a
good use-case then we can add it again.
libfprint uses the thread local context in almost all cases. Update
FpContext to also use it and make sure that any sources are removed when
the FpContext object is finalized. Otherwise we may run into
use-after-free issues.
In some situations one may want to guarantee that the last steps of an
SSM are run even when the SSM is completed early or failed.
This can easily be done by making fpi_ssm_mark_completed jump to the
next cleanup stage when called (this also includes mark_failed). Due to
the mechanism, it is still possible to explicitly jump cleanup states by
using fpi_ssm_jump_to_state, including a jump to the final state in
order to skip all cleanup states.
These routines assume that any messages is composed of a write and/or
read part. While the API allows sending and receiving as part of one
messages/transfer, it does not permit full duplex operation where data is
both send and received at the same time.
Upstream systemd/udev is pulling our autosuspend hwdb, so if udev is new
enough, then there is no need to install the file. As such, add
auto-detection logic for the scenario.
This also changes the name of the option and the type to "feature".
The device will always use sequence number 0 for certain messages. We
use this knowledge to filter the messages and assume that it is one of
these special messages rather than a response to a command.
However, we could end up sending a command with a sequence counter of 0
which would result in the response being ignored. Fix this by ensuring
we correctly wrap from 255 to 1 instead of 0.
Fixes: #358
The irq handler may already be stopped if stop_irq_handler is called. In
that case, we should immediately call the handler rather than just never
calling it.
This fixes deactivation when the device is unexpectedly unplugged.
Closes: #355
While meson suggests to always use 'library' this leads to some unwanted
behaviors when it comes to generate pkg-config files for it, as they
will include `Libs.Private` / `Required.private` fields that should not
be really part of a shared library as libfprint is meant to be used.
There are two variants one with storage and identify support and the
other without storage.
It implements the following commands:
* INSERT id
* REMOVE id
* SCAN id
* ERROR error-code
* LIST (returns saved print)
The INSERT/REMOVE/LIST commands are only available in the storage
driver. The SCAN command emulates presenting a finger.
These commands can be send ahead of time, and will be queued and
processed when appropriate. i.e. for INSERT/REMOVE that is immediately
when possible, for SCAN/ERROR processing is delayed.
The LIST command is always processed immediately.
Note that only a single command can be send per socket connection and
the command must be send in a single message. The socket will be closed
after the command has been processed.
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Instead of repeating the same code in both the virtual-image and the
virtual-device drivers, implement a class to handle the socket listening
an data reading.
Co-authored-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
The change to print a warning (for testing purposes) from commit
944e0d0383 (udev-rules: Print warning if an ID is supported) was
incorrect because it prevented duplicated to be suppressed if a device
is listed by two independent drivers.
Add a new test that checks that the unsupported list is not out of date.
As the wiki can be edited at any time, add this as a further optional
check into the CI pipeline.
As we are shipping a hwdb file now, we cannot have a collision with the
old libfprint version. Also, we are going to pull these rules into
systemd and they will not be installed via libfprint in the future. As
such, collisions will not happen again and it makes more sense like this
for systemd.
We want systemd to pull our hwdb. In order to ease this, always build
the hwdb file, even if it is disabled.
Once systemd has merged the rules, downstream should turn off the rules
in libfprint. The default in libfprint will also be changed to not build
the hwdb (udev_rules option) eventually.
We only use the rules/hwdb to enable auto-suspend. So, instead of
shipping our own rules, we can just use the existing autosuspend rules
and ship a hwdb that sets the appropriate flag.
Closes: #336
Found by coverity. While quite bad in theory, proper safeguards are in
place, so it will only result in a g_return_val_if_fail to be hit rather
than causing more severe side effects.
We used to return early in the case where the print matched in order to
report the result more quickly. However, with the early reporting
mechanism and the fprintd side implementation of it, this is not
necessary anymore.
As such, only stop the "verify" and "identify" operations when the
finger is removed (or the operation is cancelled, which is actually what
will happen currently).
It is easier (and more correct) to create a new print from the reported
data and match that against the prints in the gallery.
We continue to return NULL during verify as we cannot provide any
additional information in that case.
NBIS just does weird things and while the array-parameter warning is
easy to fix, the other is not trivial. So disable these warnings so that
we can still build using newer GCC versions.
The gallery needs to be copied, as such we must do a deep comparison
instead of comparing the pointers. We also can't do the comparison
afterwards, as the gallery is owned by the operation and that operation
is finished already.
This function was always documented to return a sunk reference, but it
did not do so. This change is technically backward incompatible.
However, it only has an effect if anything is doing a g_object_ref_sink.
Which may happen inside libfprint itself. With the change, most API
users (including fprintd) are fixed to do refcounting correctly. Any API
user which worked around this will have a memory leak now.
That is not ideal, but it is not really that bad overall. And returning
a floating reference for FpPrint creation was a bad idea in the first
place. And it really only makes sense for fp_print_new as the only
(public) use case is to create the template for enrollment.
This tests all relevant scenarios of device removal, i.e.:
* device is not open
* device is currently closing
* device is open and idle
* device is currently opening
* device is open and active
The test ensures that in all scenarios the following holds true:
* device "removed" signal is only emitted after the action completes
* context "device-removed" signal is only emitted after the device has
been closed
Note that the "opening" case is special. Here we confirm that a success
from "open" will not be overriden by a FP_DEVICE_ERROR_REMOVED error, in
order to correctly signal that the internal device state is open and it
needs to be closed.
In general, we rely on the underlying transport layer to throw errors
which will abort the current operation. This does not work for the
virtual image device though, but we need it there for testing purposes.
Add a notify::removed handler that makes things work as expected. Let it
throw a protocol error which should not be visible to the outside.
We require the close call, but as the underlying transport layer is
gone, it will generally just return an error.
In principle, it makes sense to think of close as a function that always
succeeds (i.e. it makes no sense to try again). Should the device be in
a bad state, then a subsequent open() will simply fail.
This enhances the device removal to create a well defined behaviour.
Primarily, it means that:
* "device-removed" will only be called for closed devices
* "removed" will be called only when no operation is active
Note that all actions will fail with FP_DEVICE_ERROR_REMOVED, *except*
for open which will only return this error if it failed.
Resolves: #330
